 |
| Applying the product... The only tools required and recommended are a: roller cage, 1¼ nap roller cover, high quality oil brush, 5 gallon paint screen, long arm attachment, and extension poles. Notice we said nothing about spraying this product? It will not work - DO NOT SPRAY THIS PRODUCT. Apply with a quality 1¼ nap roller and back brush the entire job with a quality oil brush. Allow product to thoroughly dry before additional coats generally 24 hours between coats. A minimum of four consecutive coats must be, applied to the entire building. [Note: All the correct supplies may be purchased here.] | |
 "The first coat will penetrate deep into the wood and will look dry, almost disappearing into the wood. This coat takes the longest amount of time, and uses the most amount of product." |
 "The second coat will also penetrate into the wood, but it takes less time and will begin to show on the surface." |
 "The third coat will blend all of the natural color in the wood and remain on the surface of the wood, providing UV protection." |
 "The fourth coat is the final coat which increases the UV protection and brings out the beautiful luster in the wood." |
Quality Alaskan Finishes® · 2545 Riverside Drive · Sault Ste Marie, Michigan 49783 · Email Our Office Copyright © 2002 -
2012 , All Rights Reserved | ||||||||||||||